Equal Logic PS100 Hyper V 2008 R2 Hyper V 2012
Hello,I am a IT administrator for a Non Profit organization that was donated a Equal Logic PS100 array that is still is good shape. I know that it is old but I believe that is still have some...
View Articlecould not bind vmk to iSCSI adapaters - vSphere 6.0
Hello I am trying to configure a new switch using the setup.plI run into the error about binding the vmk to the iSCSI adapaterI am using a windows machine and saw about the SSL problem Can anyone...
View ArticleQuestion on C2F - is there an SD Card?
I would like to know if and or where the SD card for a C2F controller module is. The module is from an PS4100.
View ArticleSANHQ Server List
Hellois there a way to manually remove a server from the SAN HEADQUARTERS server list in EQL group manager configuration ?there are two sanhq servers that been gone for a while and i can seem to find...
View ArticleController Config Syncing
I have a PS3000 running firmware 6.0.6. I first configured my active controller and everything appears to be working well with it. When I serial into the standby controller though, it has none of the...
View ArticleVirtual Storage Manager - startTime does not meet the minimum value of 0 error
Hi,Has anyone got a fix for the region problem relating to the scheduling?When trying to add or edit a schedule, we get the following error.Title: Too SmallText: startTime does not meet the minimum...
View ArticleFirmware upgrade
Hey guys, i have a Equalogic PS6010 running V5.2.5... what upgrade paths do i follow to get it to at least V8?
View ArticleEqualLogic PS4000 EX HD fail and replace
Dear Experts,I am using Server DELL EqualLogic PS4000 EX. Recently i make replacement a faulty HD. Server show that new HD status is Spare. However its light is off, but not green. I am wondering new...
View ArticleClik here to view.
hi all
i have two servers R520 connected to two switches power connect 6224 connected to PS4200 storageand another replica storage connected to the main storage lake in the figure belwoFigure 1. Cabling an...
View ArticleConvert RAID 10 (no-spares) to RAID 6 accelerated
Hello all,Is there any way to convert a RAID 10 (no-spares) array to RAID 6 accelerated? The GUI says that the selected conversion is not supported. The array is only 1/3 full so I was hoping there is...
View ArticleEquallogic volume distribution RAID 6 - RAID 50
Hello hope you can help.I have two Dell Equallogic SANs one running RAID 50 one running RAID 6. All the volumes were initially on the RAID 50 SAN.I changed the RAID preference on a volume to RAID 6 and...
View ArticleEqualLogic 6110 and 6210
Have a PS6110 with a Type 14 controller and 2TB drives and a PS6210 with a Type 15 controller and 600GB drives.Could I replace the 600GB drives in the PS6210 with the 2TB drives from the PS6110 and get...
View ArticleSAN HQ Notification Alert
Hi Dell Team,Got this error: Hope you can assistThis message was generated by the Dell EqualLogic SAN Headquarters service (version 2.5.0.6470) running on SaNHSVRThe following conditions on Group EQL...
View Articlefirmware upgrade path
hi, i need to go from 6.0.2 to the latest version.whats the best path to take TIA
View ArticleHow get the IOPS and latency on volume?
Hello :)Please advise me, how i can get the IOPS and latency on my volumes?I used to different OIDs, but i dont get a result :(1.3.6.1.4.1.12740.5.1.7.34.1.1...
View ArticleClik here to view.
PS5000e member offline - status light indicator light?
We have an issue with our PS5000e SAN. It's not a mission-critical device and we are in the process of moving off of it, but we need to get it back online if possible.This morning the member went...
View ArticleSAN HQ Critical Alert - impossible to get logs from PS4100X
Hello.I have a Dell Equallogic SAN PS4100X v7.0.10 and a SAN HQ server in release 3.0.2.7457.Yesterday I receive an email which talking about error 14.2Caution conditions:7/28/2016 5:17:09 PM[ID: 14.2]...
View ArticleDell MTU Alert
I cant manually restore the replicated files that ive sent via USB on our DR Site.Error:Data transfer operation could not start due to the following error: Internal error in transfer program (reptool)
View ArticleHitkit installation error visual C++ failed
When installing the host integration toolkit v4.90 in a newly installed server (Windows Server 2012R2). we get an error "the installation of visual c++ redistributable (x386) has failed". We tried...
View ArticleUpgrade Equallogic HIT Kit 4.8 to 4.9 fail with error
During Upgrade process of Dell EqualLogic Host Integration Tools from 4.8.0 we get an error message: Error 1720. There is a problem with this Windows Installer package. A script required for this...
View Article