i have two servers R520 connected to two switches power connect 6224 connected to PS4200 storage
and another replica storage connected to the main storage lake in the figure belwo
Figure 1. Cabling an iSCSI SAN-Attached Cluster to a Dell EqualLogic PS4000 Storage Array
i am using the one 10G link from each server connected to the 10G ports on switch. also 10 G links from switch1 to module 0 and switch2 to module 1. and the other links from servers to switches and from switches to storage is 1G? i faced problems with this scenario that server two cannot see the storage because its connected to module 1 (passive).
what i am going to do is connecting the 10G links from both switches to module 0 (active) and the 1 g links from switch to module 1 (passive).
correct me if im wrong and any suggestion for this connection since its limited to two 10G modules on each switch. one for the server and the other for storage controller.????????